nbjtp

PCBs Otu-Layer Mgbanwe Na-agbanwe Otu Mpempe Mpempe Mpempe Igwe Igwe Igwe Igwe Igwe Igwe Igwe Igwe Igwe

Mpempe PCB na-agbanwe otu akụkụ otu akụkụ na-agbanwe agbanwe maka onyonyo egosipụtara na ndị ahịa eletrọnịkị.
  • PCBs Otu-Layer Mgbanwe Na-agbanwe Otu Mpempe Mpempe Mpempe Igwe Igwe Igwe Igwe Igwe Igwe Igwe Igwe Igwe
  • PCBs Otu-Layer Mgbanwe Na-agbanwe Otu Mpempe Mpempe Mpempe Igwe Igwe Igwe Igwe Igwe Igwe Igwe Igwe Igwe

Nkọwa dị mkpirikpi:

Nlereanya: PCB na-agbanwe agbanwe nke otu oyi akwa

Ngwa ngwaahịa: Eletrọnịkị ndị ahịa

Mpempe osisi: 1 oyi akwa

Ihe ndabere: Polyimide (PI)

Ọkpụrụkpụ nke ime Cu:/

Ọkpụrụkpụ Quter Cu: 18um

Agba ihe nkiri mkpuchi: odo

Ihe mkpuchi na-ere ahịa:/

Ihuenyo silk: Ọcha

Ngwọta ihu igwe: ENIG

Ọkpụrụkpụ FPC: 0.1 +/- 0.03mm

Ụdị stiffener: SUS

Oghere m: 0.3mm

oghere kpuru:/

Oghere e liri:/

Obosara / oghere Min Line: 0.1/0.1mm

Ntachi obi (nm): PTH: 土0.076, NTPH: 0.05

Mgbochi:/


Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwapụta

Otu Ike usoro Otu Ike usoro
Ụdị mmepụta FPC otu oyi akwa / okpukpu abụọ FPC
Multi- oyi akwa FPC / Aluminom PCBs
PCB ndị siri ike-Flex		 Nọmba oyi akwa FPC 1-16 oyi akwa
2-16 n'ígwé Rigid-FlexPCB
bọọdụ sekit Ebipụtara HDI
Oke nrụpụta kacha Otu oyi akwa FPC 4000mm
Doulbe n'ígwé FPC 1200mm
Multi-layers FPC 750mm
PCB siri ike-Flex 750mm		 Igwe mkpuchi mkpuchi
Ọkpụrụkpụ		 27.5um / 37.5/ 50um / 65/ 75um / 100um /
125um / 150um
Ọkpụrụkpụ osisi FPC 0.06mm - 0.4mm
PCB siri ike-Flex 0.25 - 6.0mm		 Nkwenye nke PTH
Nha		 ± 0.075mm
Emecha elu elu Imikpu ọla edo/mikpu
Silver/Gold Plating/Tin Plat ing/OSP		 Ihe siri ike FR4 / PI / PET / SUS / PSA / Alu
Nha Orifice Semicircle Nkeji 0.4mm Oghere Min Line/ obosara 0.045mm / 0.045mm
Ọkpụrụkpụ ndidi ± 0.03mm Mgbochi 50Ω-120Ω
Ọkpụrụkpụ ọla kọpa 9um/12um/18um/35um/70um/100um Mgbochi
Achịkwara
Ndidi		 ± 10%
Nkwadebe nke NPTH
Nha		 ± 0.05mm Obosara Min Flush 0.80mm
Min Via oghere 0.1mm Mejuputa
Ọkọlọtọ		 GB / IPC-650 / IPC-6012 / IPC-6013II /
IPC-6013III

Anyị na-eme PCBs na-agbanwe otu oyi akwa nwere ahụmịhe afọ 15 na ọkachamara anyị

nkọwa ngwaahịa01

3 oyi akwa Flex PCBs

ngwaahịa-nkọwa3

4 oyi akwa PCB siri ike-Flex

nkọwa ngwaahịa03

8 oyi akwa HDI Biputere Circuit Board

Ngwa ule na nyocha

ngwaahịa-nkọwa2

Nnwale microscope

ngwaahịa-nkọwa3

Nyocha AOI

ngwaahịa-nkọwa4

Nnwale 2D

ngwaahịa-nkọwa5

Nnwale impedance

ngwaahịa-nkọwa6

Nnwale RoHS

ngwaahịa-nkọwa7

Nyochaa na-efe efe

ngwaahịa-nkọwa8

Nnwale kwụ ọtọ

ngwaahịa-nkọwa9

Na-ehulata Teste

Ọrụ PCB anyị na-agbanwe otu oyi akwa

.Nye nkwado teknụzụ tupu ire ere na mgbe ire ere;
.Omenala ruo n'ígwé 40, 1-2days ngwa ngwa na-atụgharị ntụkwasị obi prototyping, mmepụta oke, ịzụrụ akụrụngwa, Mgbakọ SMT;
.Na-akwado ma ngwaọrụ ahụike, njikwa ụlọ ọrụ, ụgbọ ala, ụgbọ elu, eletrọnịkị ndị ahịa, IOT, UAV, nkwukọrịta wdg.
.Ndị otu anyị nke ndị injinia na ndị nyocha raara onwe ha nye iji mezuo ihe ị chọrọ na nkenke na ọkachamara.

nkọwa ngwaahịa01
nkọwa ngwaahịa02
nkọwa ngwaahịa03
ngwaahịa-nkọwa1

Kedu ka bọọdụ sekit e biri ebi na-agbanwe agbanwe na-etinye na elekere

A na-ejikarị bọọdụ sekit e biri ebi na-agbanwe agbanwe (PCBs) n'ọtụtụ ngwa elekere, gụnyere:

1. Mkpokọta akụrụngwa: PCB nwere otu akụkụ na-enye ohere maka ntinye na njikọta nke ngwa eletrọnịkị ejiri na elekere dị ka microcontrollers, ngosipụta, batrị, na ihe ndị ọzọ na-akwado.Ndị PCB ndị a nwere akara ọla kọpa maka ụzọ mgbama eletrik na pad maka ihe ndị na-ere ere.

2. Kọmpat imewe: Elekere na-abụkarị obere nha, na PCB flex nwere otu akụkụ na-enye ohere maka nhazi kọmpat na nke ọma.
Mgbanwe nke PCB na-enye ohere ka ehulata, mpịaji, ma ọ bụ kpụrụ ya ka ọ dabara n'ime obere oghere nke elekere ka ọ ka na-enye njikọ eletrik a pụrụ ịdabere na ya.

3. Nkwalite ohere: PCB na-agbanwe agbanwe nwere otu akụkụ nwere ike iji oghere nche rụọ ọrụ nke ọma.Otu oyi akwa na-enye ohere maka profaịlụ dị gịrịgịrị, na-ebuli ohere dị n'ime ime ma na-enye ohere ka e nwee ihe ndị ọzọ ma ọ bụ ọrụ dị n'ime oke elekere.

ngwaahịa-nkọwa1

4. Mgbanwe na ịdịte aka: Mgbanwe nke PCB ndị a na-enye ha ohere iguzogide nrụgide arụ ọrụ na-ezute n'iji ya eme ihe ma ọ bụ mgbe ị na-agbakọta elekere, dị ka ịgbagọ na ntụgharị.Mgbanwe a na-eme ka ha na-eguzogide ọgwụ na mmebi na arụ ọrụ, na-ahụ na elekere ga-anọgide na-arụ ọrụ ọbụna n'okpuru mmegharị mgbe niile.

5. Njikọ a pụrụ ịdabere na ya: A na-emepụta PCB na-atụgharị otu akụkụ ya na akara ọla kọpa, nke nwere ike inye njikọ eletrik a pụrụ ịdabere na ya n'etiti ihe ndị dị na ya.Njikọ ndị a dị oke mkpa maka ọrụ elekere na-arụ ọrụ nke ọma yana idobe oge ziri ezi.Owuwu otu oyi akwa na-eme ka usoro mgbakọ dị mfe ma belata ohere nke nsogbu njikọ.

6. Mmepụta dị ọnụ ahịa: PCB ndị nwere akụkụ nwere akụkụ na-adịchaghị mgbagwoju anya ma chọọ ihe dị nta na usoro nrụpụta karịa PCB multilayer.Nke a na-eme ka usoro mmepụta ihe dị ọnụ ala karịa, na-eme ka ọ mara mma na ndị na-ekiri ihe na-achọ ngwọta dị mma.

7. Nhazi na nhazi onwe ya: PCB na-agbanwe agbanwe nwere ike ịhazi ya iji gboo ihe ndị a chọrọ maka elekere, dị ka ọdịdị pụrụ iche ma ọ bụ ntinye nke ọrụ ụfọdụ.Ndị na-emepụta elekere nwere ike gbanwee nha, udi na nhazi nke PCB iji nabata ihe nrụpụta dị iche iche ma ọ bụ tinye ọrụ ụfọdụ.

bọọdụ na-agbanwe agbanwe nwere otu akụkụ na elekere FAQ

1. Kedu ihe bụ bọọdụ nro dị otu akụkụ?
- PCB flex nwere otu akụkụ bụ bọọdụ sekit e biri ebi nke nwere akara ọla kọpa na pad n'otu akụkụ naanị.
Emere ya site na ihe ndị na-agbanwe agbanwe dị ka polyimide ma ọ bụ polyester, ha nwere ike ịgbagọ ma ọ bụ kpụzie ha iji mezuo ihe achọrọ n'ichebe.

2. Gịnị bụ ngwa nke otu akụkụ mgbanwe osisi na elekere?
- A na-eji PCB ndị nwere otu akụkụ na-agbanwe agbanwe na elekere maka ntinye akụrụngwa, njikọta akụkụ eletrọnịkị, yana inye ikpo okwu maka njikọ eletrik.Ha na-ahụ maka ịkwọgharị akara n'etiti ihe ndị dị ka microcontrollers, ngosi, batrị na ọrụ elekere ndị ọzọ.

3. Gịnị bụ uru nke otu akụkụ mgbanwe mbadamba na elekere?
- PCB flex nwere otu akụkụ na-enye ọtụtụ uru na ngwa elekere.Ha na-ekwe ka nhazi kọmpat, iji ohere kachasị mma na mgbanwe iji nagide nrụgide ọrụ.Ha na-enyekwa njikọ eletrik a pụrụ ịdabere na ya ma nwee ike ịhazi ya iji mezuo ihe ndị chọrọ imewe.

ngwaahịa-nkọwa2

4. Enwere ike ịgbatị ma ọ bụ mee ka PCB flex nwere akụkụ dabara adaba n'ime obere oghere nke elekere?
- Ee, PCB flex nwere otu akụkụ ka emebere ka ọ bụrụ nke na-agbanwe agbanwe ma nwee ike gbagọọ ma ọ bụ kpụzie ya ka ọ dabara na mmachi nke imepụta elekere.Mgbanwe ha na-enye ha ohere ime mgbanwe na ohere dị na-emebighị njikọ eletrik.

5. PCB ndị nwere akụkụ nwere otu akụkụ ọ na-adịte aka karịa PCB ndị siri ike?
- Ee, PCB flex nwere otu akụkụ na-adịkarị ogologo karịa PCB ndị siri ike n'ihi mgbanwe ha.Ha nwere ike iguzogide mgbada, ntụgharị na nrụgide ọrụ ndị ọzọ na-ezute n'oge elekere ma ọ bụ mgbakọ, na-eme ka ha na-eguzogide mmebi na ọdịda.

6. Ọ bụ otu akụkụ flex PCB na-eri-irè maka elekere n'ichepụta?
- Ee, PCB flex nwere otu akụkụ na-adịkarị ọnụ ahịa maka nrụpụta elekere karịa PCB dị iche iche dị mgbagwoju anya.Nhazi ha dị mfe na-achọ ihe ole na ole na usoro nrụpụta, na-ebelata ọnụ ahịa mmepụta.

7. Enwere ike ịhazi PCB flex otu akụkụ maka nhazi elekere?
- Ee, enwere ike ịhazi PCB flex nwere otu ihu iji mezuo ihe achọrọ maka elekere.Enwere ike gbanwee ha na nha, ọdịdị na nhazi iji nabata ihe nhazi dị iche iche ma ọ bụ jikọta ọrụ dị iche iche dịka mkpa nke onye nrụpụta elekere siri dị.

8. A na-eji bọọdụ dị nro nwere otu akụkụ n'ọtụtụ ebe na ụlọ ọrụ nche?
- Ee, a na-ejikarị PCB flex nwere otu akụkụ na ụlọ ọrụ nche maka uru dị iche iche ha na dabara maka obere na kọmpat.Ojiji ha juru ebe niile na elekere analog ọdịnala yana smartwatches ọgbara ọhụrụ.

  • Nke gara aga:
  • Osote:
    • Dee ozi gị ebe a ziga anyị ya

    Ngwaahịaedemede

    Pịa tinye ka ịchọọ ma ọ bụ ESC mechie