Otu akụkụ na-agbanwe agbanwe PCBs Supplier China PCB Prototype

Nkọwa dị mkpirikpi:

Ụdị: PCB na-agbanwe agbanwe naanị otu akụkụ

Ngwa ngwaahịa: njikwa ụlọ ọrụ

Mpempe osisi: 1 oyi akwa

Ihe ndabere: Polyimide (PI)

Ọkpụrụkpụ nke ime Cu:/

Ọkpụrụkpụ Quter Cu: 18um

Agba ihe nkiri mkpuchi: odo

Ihe mkpuchi na-ere ahịa:/

Ihuenyo silk: Ọcha

Ngwọta ihu igwe: ENIG

Ọkpụrụkpụ FPC: 0.1 +/- 0.03mm

Ụdị stiffener: SUS

Oghere m: 0.3mm

oghere kpuru:/

Oghere e liri:/

Obosara / oghere Min Line: 0.1/0.1mm

Ntachi obi (nm): PTH: 土0.076, NTPH: 0.05

Mgbochi:/

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwapụta

Otu	Ike usoro	Otu	Ike usoro
Ụdị mmepụta	FPC otu oyi akwa / okpukpu abụọ FPC Multi- oyi akwa FPC / Aluminom PCBs PCB ndị siri ike-Flex	Nọmba oyi akwa	FPC 1-16 oyi akwa 2-16 n'ígwé Rigid-FlexPCB bọọdụ sekit Ebipụtara HDI
Oke nrụpụta kacha	Otu oyi akwa FPC 4000mm Doulbe n'ígwé FPC 1200mm Multi-layers FPC 750mm PCB siri ike-Flex 750mm	Igwe mkpuchi mkpuchi Ọkpụrụkpụ	27.5um / 37.5/ 50um / 65/ 75um / 100um / 125um / 150um
Ọkpụrụkpụ osisi	FPC 0.06mm - 0.4mm PCB siri ike-Flex 0.25 - 6.0mm	Nkwenye nke PTH Nha	± 0.075mm
Emecha elu elu	Imikpu ọla edo/mikpu Silver/Gold Plating/Tin Plat ing/OSP	Ihe siri ike	FR4 / PI / PET / SUS / PSA / Alu
Nha Orifice Semicircle	Nkeji 0.4mm	Oghere Min Line/ obosara	0.045mm / 0.045mm
Ọkpụrụkpụ ndidi	± 0.03mm	Mgbochi	50Ω-120Ω
Ọkpụrụkpụ ọla kọpa	9um/12um/18um/35um/70um/100um	Mgbochi Achịkwara Ndidi	± 10%
Nkwadebe nke NPTH Nha	± 0.05mm	Obosara Min Flush	0.80mm
Min Via oghere	0.1mm	Mejuputa Ọkọlọtọ	GB / IPC-650 / IPC-6012 / IPC-6013II / IPC-6013III

Anyị na-eme PCB Prototype na ahụmịhe afọ 15 na ọkachamara anyị

3 oyi akwa Flex PCBs

4 oyi akwa PCB siri ike-Flex

8 oyi akwa HDI Biputere Circuit Board

Ngwa ule na nyocha

Nnwale microscope

Nyocha AOI

Nnwale 2D

Nnwale impedance

Nnwale RoHS

Nyochaa na-efe efe

Nnwale kwụ ọtọ

Na-ehulata Teste

Anyị PCB Prototype Ọrụ

.Nye nkwado teknụzụ tupu ire ere na mgbe ire ere;
.Omenala ruo n'ígwé 40, 1-2days ngwa ngwa na-atụgharị ntụkwasị obi prototyping, mmepụta oke, Nzụta akụrụngwa, Mgbakọ SMT;
.Na-akwado ma ngwaọrụ ahụike, njikwa ụlọ ọrụ, ụgbọ ala, ụgbọ elu, eletrọnịkị ndị ahịa, IOT, UAV, nkwukọrịta wdg.
.Ndị otu anyị nke ndị injinia na ndị nyocha raara onwe ha nye iji mezuo ihe ị chọrọ na nkenke na ọkachamara.

Gịnị bụ teknuzu iche n'etiti Single-n'akụkụ Flexible PCB na abụọ-akụkụ mgbanwe sekit mbadamba?

PCB ndị na-agbanwe agbanwe nwere otu akụkụ nwere oyi akwa na-eduzi n'otu akụkụ nke ihe mkpụrụ.A na-etinyekarị akụrụngwa n'akụkụ a, ebe akụkụ nke ọzọ na-anọgide na-adịghị mma.A na-ejikarị ọla kọpa eme akara ndị na-arụ ọrụ ma nwee ike iji usoro dị iche iche emepụta ihe dị ka etching.

bọọdụ sekit na-agbanwe agbanwe nwere akụkụ abụọ, n'aka nke ọzọ, nwere ọkwa na-eduzi n'akụkụ abụọ nke mkpụrụ.
Nke a na-enye ohere ka a na-etinye ihe ndị dị n'akụkụ abụọ ahụ, na-amụba njupụta akụrụngwa na arụ ọrụ nke osisi ahụ.Enwere ike ijikọ akara ndị na-eduzi site na iji plated site na oghere (PTHs) ma ọ bụ vias, na-enye ohere njikọ eletrik n'etiti elu na ala ala.

Isi ihe ọzọ dị iche bụ na PCB na-agbanwe agbanwe na-adị otu akụkụ na-adịkarị ọnụ ahịa ma dị mfe imepụta karịa akụkụ abụọ.N'ihi akwa oyi akwa na-eduzi na enwere ike iji PTH ma ọ bụ vias, mgbanwe ihu abụọ na-adịkarị mgbagwoju anya, na-achọ usoro nrụpụta dị elu karị, ya mere ọ dị ntakịrị ọnụ.

Kedu ihe kpatara ịchọrọ PCB Prototype ngwa ngwa?

1. Mmepụta obere ọnụ ahịa dị ọnụ ala: ngwa ngwa PCB prototype na-enye ohere maka nrụpụta obere olu na-agba ọsọ, nke nwere ike ịdị ọnụ ahịa maka mmalite mmalite ngwaahịa, ahịa niche, ma ọ bụ ihe nrụpụta oke.
Ọ na-ewepụ mkpa ọ dị maka itinye nnukwu ego n'ihu n'ime akụrụngwa mmepụta oke, ngwá ọrụ, na ngwa ahịa.

2. Imekọ ihe ọnụ na nzaghachi: ngwa ngwa PCB prototype na-enyere ndị injinia aka imekọ ihe ọnụ na ndị metụtara, gụnyere ndị ahịa, ndị otu imewe, na ndị na-emepụta ihe, nke ọma.Site n'inwe ụdị ụdị anụ ahụ n'aka, ha nwere ike ịnakọta nzaghachi bara uru na ntinye aka site n'echiche dị iche iche, na-eduga na nhazi nhazi ka mma na nsonaazụ ngwaahịa ikpeazụ.

3. Mbelata oge n'ahịa: Na ngwa ngwa PCB prototype, ndị injinia nwere ike belata usoro mmepe ngwaahịa, na-ebelata oge ọ na-ewe iji weta ngwaahịa n'ahịa.Nke a na-enyere ndị ọchụnta ego aka ị nweta ohere n'ahịa, na-aga n'ihu ndị asọmpi, na ịkpata ego ngwa ngwa.

4. Mgbanwe mgbanwe na imewe mgbanwe: PCB Prototype na-enye mgbanwe iji tinye mgbanwe mgbanwe na mmezi n'oge usoro mmepe.Ndị injinia nwere ike gbanwee ngwa ngwa ma megharịa na nhazi PCB, na-eme mgbanwe dabere na nsonaazụ nnwale, nzaghachi ndị ahịa, ma ọ bụ mmachi nrụpụta.Ike a na-enyere aka ịkwalite mmepụta ngwaahịa ikpeazụ, na-eme ka arụmọrụ ya na ọrụ ya dịkwuo mma.

5. Enwekwukwa nkwurịta okwu na ndị na-emepụta: Ngwa ngwa PCB prototype gụnyere ịrụkọ ọrụ ọnụ na ndị na-emepụta PCB, na-akwalite nkwurịta okwu ka mma na imekọ ihe ọnụ n'etiti otu ndị na-emepụta ihe na ndị na-ebubata ya.Mmekọrịta chiri anya a na-akwado imewe maka nrụpụta (DFM), ebe ndị injinia nwere ike ịkwalite imewe ahụ iji hụ na nrụpụta nke ọma ma zere nsogbu mmepụta ma ọ bụ igbu oge.

6. Ịmụta na mmepe nkà: PCB Prototype na-enye ndị injinia ohere inweta ahụmahụ bara uru na mgbakọ PCB na usoro mmepụta ihe.Ọ na-enyere ha aka ịghọta mgbagwoju anya na nuances nke mmepụta PCB, na-eduga na mkpebi imewe ka mma, omume DFM ka mma, yana nkwalite nkà injinịa n'ozuzu ya.

Nke gara aga: 4 PCBs na-agbanwe agbanwe PI Multilayer FPC maka ndị na-ekwu okwu

Osote: PCBs Otu-Layer Mgbanwe Na-agbanwe Otu Mpempe Mpempe Mpempe Igwe Igwe Igwe Igwe Igwe Igwe Igwe Igwe Igwe

Dee ozi gị ebe a ziga anyị ya